|
Rubber
Conveyor Belts
are being
successfully used in every industry where bulk material
handling is required. It's strong nature gives best
performance , thereby reducing cost per tonne material
conveyed.
With
our experience of more than a decade in high-tech products,
innovation and development, we have incorporated latest
technological methods in manufacturing conveyor belts. Our
range of manufacture is up to 1200 mm width precisely to the
specific requirement of customer either open or endless with
piles ranging from 2 to 8 and Rubber
Cover Grade suitable for particular application in any
thickness ranging from 1.0 mm to 12.0 mm.
|
|
|
HEAT
RESISTANT CONVEYOR BELT:-
In
general it is economical to adopt a heat resistant belt if the
temperature of the material to be carried is over 60°C (140°F).
As the damage of cover depends on the temperature and nature
of transported material, the proper selection of a belt to fit
in particular operating conditions is important. Especially
the relation of temperature between the material and belt
surface should be considered when selecting the belt.
When transporting material of high temperature, the
temperature of belt surface rises by contact with material,
but on the return journey the heated surface gets cooled
naturally by air so that the surface temperature becomes
considerably cooler than that of the material. The temperature
depends on kind, size, temperature, quantity of the material
to be carried, belt speed, belt length, etc. This belt is
designed for transporting cement clinker, cokes, sintered
ores, soda ash, chemicals, fertilizers etc.
COLD
RESISTANT CONVEYOR BELT:-
This
belt is made especially for use at low temperature (down to
-50°C) where a belt with ordinary rubber covers cannot
withstand.
OIL
RESISTANT CONVEYOR BELT:-
Oily
material causes the ordinary rubber covers of the belt to
swell and peel off which results in a complete breakdown in
the conveyor system. The belt compounded of oil-resistant
quality synthetic rubber has good resistance to the damaging
effects encountered when conveying oil contaminated or treated
materials.
FIRE
RESISTANT CONVEYOR BELT:-
This
belt is a prerequisite to prevent fire risks in coal mines
which are not easily accessible and reduce maintenance of the
conveyors which may be damaged by flame at the blast furnaces
of iron works.
ABRASION
RESISTANT CONVEYOR BELT:-
Materials
being carried as well as idlers and frame of the conveyor may
cause excessive wearing on normal belts. To prolong the life
of the belts running under the swear wearing conditions,
special and super abrasion rubber is compounded for the belt
covers.
COLOR
CONVEYOR BELT:-
The
most suitable colored belt may be selected to match the
colored combination of service places and to ensure safety and
health of workers. Available in white, green and yellow
colors, etc.
HYGIENIC
CONVEYOR BELT:-
This belt is made for use where foodstuffs are handled. The
covers are compounded to provide non-toxic, tasteless and
odorless properties.
CHEMICAL
RESISTANT CONVEYOR BELT:-
This
belt performs effectively when chemicals, pulps, ceramics,
foodstuffs, fertilizers, etc. are attached to the material to
be carried. According to the nature of the material and
chemicals, acid-resistant or alkali-resistant covers may be
selected.
ROUGH
TOP CONVEYOR BELT:-
This
belt, provided with cushiony and anti-slippery effects due to
its soft rugged surface, is suitable for transporting fragile
or deformable materials and packed goods.
Features:
- As there is no button cover rubber, it makes the
friction coefficient less and is suitable for over table and
over flat
panel.
- Meshes of net pattern of the
top surface cover has cushioning effect, mollifies and absorbs
vibrations and impacts
given on the materials transported and
simultaneously prevents slip.
- Although it depends on the
material transported, transportation at inclination angles at
25° ~ 30° is feasible.
-
This is a belt of cut edge type. The cushion rubber of
approximately 1mm laid between 2 piles.
|
Home
Profile
Contact
